0:00-0:45 Introduction
0:46-2:19 It’s out of control
2:20-5:49 MIG vs MAG vs GMAW
5:50-6:45 Language on weld tests
6:46-10:10 GMAW-S
10:11-11:44 Spray transfer uphill?
11:45-15:21 Transition point
15:22-16:40 Procedure handbook for welding
16:41-18:15 Manufacture provided setting range
18:16-22:31 Hobart 210MVP
22:32-24:04 Welding Tips & Tricks YouTube channel
24:05-24:58 Contact tip
24:59-28:20 CTWD (contact to work distance)
28:21-32:25 Flush contact tip to nozzle
32:26-36:00 Thin sheet metal
36:01-39:00 Smaller wire to melt easier
39:00-44:05 Adjust the wire speed or volts?
44:06-51:15 Wire speed up or down?
51:16- 52:15 Go for that sound weld first
52:16-54:55 Your signature
54:56-58:10 Jumping back and forth
58:11-1:00:13 Learn something new everyday
1:00:14-1:05:14 Shielding gas knowledge
1:05:15-1:06:50 Aluminum MIG welding
1:06:51-1:10:25 Gas flow
1:10:26-1:12:45 Just crack the valve!
1:12:46-1:19:11 More amperage, crank that wire
1:19:12-1:21:12 Amperage readout on machine
1:21:13-1:22:30 Try it yourself
1:22:31-1:25:26 Cut and etch
1:25:27-1:28:50 If a failure was my fault
1:28:51-1:30:00 Wrapping up
1:30:01-1:31:10 Closing

Click play or Download from iTunes