Category: Aluminum (page 2 of 11)

Welding Aluminum: MIG Spool Gun vs TIG




Welding Aluminum

Video Transcript

Welding Aluminum: MIG Spool Gun vs TIG

Hey. Jody here, with WeldingTipsandTricks.com. Last week’s video was part one of the aluminum awning build. We put together a lot of the structure in JD’s shop, all TIG welding with a 200 amp machine, full pedal for most of the welding. A lot of people ask why we didn’t use a spool gun. Why we didn’t MIG weld it. We certainly could have. Part two’s not ready yet. I want to wait until all the shots are finalized and the awning is hung in place where you can see the finished product. read more

Welding Aluminum at JD’s shop




Welding Aluminum

Video Transcript

Welding Aluminum at JD’s Shop

Today, we’re doing a little tig welding on aluminum, on a aluminum awning project at JD’s shop, Apex welding and we’re pushing this 200 amp machine pretty hard. Full disclosure here, this is sponsored video, but I did not pay for this machine. I asked them to send it to me because I got a lot of questions about it. Couldn’t answer it. All I could say was I’d never welded with it before. read more

How to TIG Weld Aluminum Part 3 – AC frequency settings




TIG Weld Aluminumg

Video Transcript

How to TIG Weld Aluminum: Part 3 – AC Frequency Settings

Hey, Jody here with WeldingTipsandTricks.com. Today is Part Three of a how to tig weld aluminum series. In Part One, I asked for questions and comments. One of the most frequently asked questions was, “What about AC frequency? Can you explain where you would want to use certain frequency settings?” A lot of newer tig inverters have this setting. Today I’m going to take a look at that, and try to answer some of the questions that came in on AC frequency settings, where do you use a low frequency, where do you use a higher frequency setting, and what’s a good all around setting that will work for most everything. Let’s do it. read more

How to TIG Weld Aluminum – Part 2





TIG Weld Aluminum

Video Transcript

How to TIG Weld Aluminum – Part 2

This is part two in a how to TIG weld aluminum series. In part one, I asked for comments, and I said that the comments are going to sort of determine the direction I go with this and the topics that I cover. Well, I got a lot of them, a whole lot. Like, over 350 comments so far. So I’ve got to figure out how to address that, and I’ve got to get a game plan together. read more

New Website: WeldmongerTools.com

WM_Tools™_Dirty_Profile

Welders!

I’d like to thank you personally for being a subscriber to my videos and to this “vlog”. You guys are the best.

I thought I’d just make quick announcement that’s going to be very exciting for a lot of you…

I get questions all the time like, “What sort of welding machine should I buy?” or “Where can I get a bargain on gear?” read more

Older posts Newer posts

© 2017 Weldmonger™

Back to Top ↑