Have you ever been to Fabtech?
Its North Americas largest welding and fabrication show.
I am heading out the morning after I am writing this for 3 days of “total immersion” into the world of welding a fabrication…all under one roof.
Tag: tig welding tips (page 6 of 25)
Welding Distortion is a complicated subject.
But one thing is certain…
understanding that weld metal shrinks as it cools is fundamental to understanding ways to prevent distortion.
this video addresses welding stainless steel square tubing and shows a technique for using weld sequence and direction of travel to keep things straight.
309 Tig rods are designed for welding stainless steels to carbon steels…but they are a good rod to have in your shop because 309 is a very versatile rod…good for welding pretty much any steel to any other steel in a pinch.
not necessarily the absolute best all around choice…and it shouldn’t be used indiscriminately…but 309 will usually get the job done.
Speed tacking involves setting amperage to 30-50 percent higher than normal welding amperage. Then using a torch switch or foot pedal, use very quick blasts of half a second or less to fusion tack weld.
this makes for very quick tack welding that is clean and free from oxidation.
While Qtys last, get a hog tee shirt and a tig finger for around 23 bones
My TIG rod situation had gotten out of hand so I made some TIG rod Storage out of PVC pipe.
© 2024 Weldmonger™
Back to Top ↑